VERTEX | Ref: 2625

Vertex Kolben Sherco/Bultaco Trial 2.9


_Vertex Kolben Sherco/Bultaco Trial 2.9 | 2625 | Greenland MX_

Foto nur zu Informationszwecken, das nicht mit dem richtigen Produkt übereinstimmen muss.

Details

VERTEX | Ref: 2625

Vertex Kolben Sherco/Bultaco Trial 2.9


Personalisierter
Kundenservice
Weniger Bezahlen
Besser Kaufen
Club GMX
Exklusive Vorteile
190,21€ Ersparnis 38,04€
152 , 17
Mwst. inklusive
Versand gratis
- +

Verfügbarkeit: In Stock

Beschreibung
Technische Details
Größentabelle
All Vertex Pistons Feature: Standard pistons and components are OEM replacements. Kits include piston, rings, wrist pin and circlips. All pistons are heat treated with a T-5 or T-6 hardening and tempering cycle. Replacement rings are sold individually ;
Marken VERTEX

HOW TO MEASSURE ANY DIRT BIKE´S PISTONS

The pistons of any internal combustion engine, two or four-stroke, are conical and oval, to control its expansion in its operation. To get to know your maximum measurement you have to measure at 10-12 mm. of the skirt, in the opposite part to the bolt.

When we see a mark on the head of the piston, for example, 80 mm. or we have a cylinder of 80 mm. this measure is corresponds to the cylinder, when meassuing the piston we will see that actually measurement is 79.95 mm., the tolerance between piston and cylinder would be 5 cents (0.05 mm.).

In the aluminum cylinders with hard chrome interior treatment, already in disuse, or NIKASIL the measure of 80 mm. It is usually fixed to 80 mm.

The pistons work with tolerances between 4 to 6 hundredths (0.04-0.06) for two-stroke engines and 3 to 4 hundredths for four-stroke engines (0.03-0.04). To fix a deformed cylinder, the interior of the cylinder shall be polished first and the measurement is adjusted with pistons that are over-measured for this purpose, marked with letters A-B-C-D (selection); the lowest measure being A, increasing 1 hundredth per letter; that is, selection B 0.01 mm. greater than A, C 0.02 mm. greater than A, etc.

EXAMPLES

New Cylinder Ø 80.00 mm. mounts a piston of Ø 79,97 A Factory Tolerance 0.03 mm.

Polished Cylinder Ø 80,01 mm. mounts a piston Ø 79,98 B Factory Tolerance 0,03 mm.

Polished Cylinder Ø 80,02 mm. mounts a piston Ø 79,99 C Factory Tolerance 0,03 mm.

Polished Cylinder Ø 80,03 mm. mounts a piston Ø 80,00 D Factory Tolerance 0,03 mm.

The important thing is to maintain the tolerance, which the manufacturer recommends, between cylinder and piston.

Produkte, die Sie angeschaut haben